Company News

How to Connect Coaxial Cable Connectors

Views : 1174
Update time : 2019-05-14 16:39:21

Coaxial Cable is any Cable that has an interior cord shielded with an exterior conductive sheath by a dielectric (non-conductive) material.[1] Here's a appear at how to mingle your own connectors to Cable TV coaxial Cable.

1. Initial Steps

1) determine your Cable size. Cable terminology can exist confusing. appear above the aspect of your coaxial cord although the size designation. at most homes, the two most common sizes are RG-6 and RG-59.
  • RG stands although "Radio Guide." The numbers of the different versions of RG Cable refer to the diameter (59 meaning .059, and 6 meaning .06, etc) and interior characteristics of the Cable, including the quantity of shielding and the Cable's attenuation, which refers to how much sign loss there is per length of Cable.
  • You can during sound visit the vocabulary RF used with these Cables, which stands although "Radio Frequency."
  • Most non-industrial coaxial Cable is now known during RG-6, although the foregoing thinner lower-quality standard of RG-59 is however used at some applications and older homes. Commercial installers can apply a thicker RG Cable, comparable RG-11(which is only used if the distance from the source tap to your point of termination at the home is greater than 200 feet)
  • RG Cables used at homes although common purposes to exist 75 ohm (RG-6 or RG-59).
  • Be aware that full Cables (and their connectors) become at a species of qualities. obtain the best trait Cable you can.

2) choose the accurate connectors. Most connectors although home video installations are made with F-Style connectors. However, it is feasible your system uses N-type connectors.
  • Be aware that there are little types of F-type RG-6 Cable available, mainly screw-on and crimp-style connectors.
    • Screw-on connectors are simple to use, besides during are less obtain and can desert a little attitude pocket. Some crowd trust this can affect your sign quality.
    • Crimp-style connectors eat two parts: a ring (or crimp) and a terminator. They are typically more difficult to install, besides during can achieve the greatest lengths and best connections when used correctly.
  • Know that to invent a connection you will lack a masculine and a female connector of the identical type.
    • Male connectors eat the center cord sticking out, however female connectors eat a space although the center cord to cane into. exist sure to apply the adverse gender to the connector you will exist making. Most Cables goal at masculine connectors.
  • Use an SMA (sub-miniature translation A) connector although identical little coaxial Cable.

2. Strip The Cable

1) shorten the Cable flush.

2) neat the exterior cover (usually dark rubber) backward 1/2".
  • Be identical careful no to shorten into the metal braiding direct below the exterior housing. The braiding can exist both "loose" cord and a foil-like metal give at shielded wire.

3) Carefully tug backward the interior braiding (second channel) exterior the exterior cover. restrain to invent sure nobody of the braided cord gets wrapped about or touches the copper center conductor.

4) neat backward the (usually white, besides during can exist clear) dielectric flexible from the interior center Cable.
  • Be absolutely sure no to scratch or nick the center conductor. Any break to this conductor can severely collision your signal.

5) promote the connector down can the Cable goal consequently that the copper center of the coaxial Cable sticks out.
  • Be sure the dielectric (aluminum foil) is trimmed consequently that it does no enter into the terminator of the connector.

6) Screw the connector into the goal of the Cable. The cord will shorten into the exterior housing and wrap the shielding weave, making a tight fit.

3. Using A Crimp-Style Connector

1) put the crimp ring can the Cable end.

2) neat the exterior cover backward about 1/4".

3) neat the shielding, cord wrap and dielectric backward to the naked interior wire.

4) desert about 1/8" of dielectric.

5) put the terminator can the goal of the cord consequently the copper center sticks out across the hole.

6) promote the crimp-style connector down into the Cable goal consequently that the underground of the connector goes among the foil and the exterior housing.
  • This can exist identical difficult to do. attempt holding the Cable goal with a unite of pliers, or clamping it at a vice. attempt no to bow when pushing down.

7) Crimp the ring about the exterior of the Cable.

8) neat any loose wires.

9) shorten the interior center cord blush with the goal of the connector.

10) draw above the connector to invent sure it is attached.
N.I.U ELECTRIC GROUP CO., LTD
ns_pop_close
ns_pop_main
Consult us
Leave your email and you will get professional service and detailed quotation. Thank you!!!